Kanpur to Mumbai by Road: Truck Route and Transit Time for Household Goods
1200 km by road on NH-27 to Jhansi, then the Agra–Mumbai road via Indore. A loaded truck usually takes 18-22 hrs. This page follows the truck: the towns on the way, the slow stretches, how it enters Mumbai, and the weeks to plan around.
- 1200 km by road
- NH-27 to Jhansi, then the Agra–Mumbai road via Indore
- Truck: 18-22 hrs
- Uttar Pradesh › Madhya Pradesh › Maharashtra
How long does a truck take from Kanpur to Mumbai by road?
Kanpur to Mumbai is about 1,200 to 1,300 km. The truck goes west to Jhansi, crosses Madhya Pradesh through Shivpuri, Guna and Indore, then comes down the old Agra–Mumbai road through Dhule and Nashik. Plan for two days on the road; the ghats near Mumbai and the monsoon add time.
The Road from Kanpur to Mumbai
From Kanpur the truck takes NH-27 west through Bhognipur and Kalpi, where it crosses the Yamuna, then Orai to Jhansi. It heads to Shivpuri and joins the old Agra–Mumbai road south through Guna, Biaora and Dewas to Indore. After Indore it goes down to the Narmada at Khalghat, over the Bijasan ghat into Maharashtra, through Dhule, Malegaon and Nashik, and down the Kasara ghat to Bhiwandi and Thane.
How a Loaded Truck’s Journey Usually Runs
Packing in Kanpur usually takes the day, and the driver leaves in the evening. The first night takes the truck past Jhansi, and by the next afternoon it is near Indore. It crosses the Narmada and the state border during the second night, reaches Nashik around dawn and comes down the ghat in the morning.
Stretches That Slow the Truck
The Kalpi Yamuna bridge and Orai town are slow at the start. The Bundelkhand stretch to Shivpuri is open but lonely. After Indore come the Ganpati ghat, the Bijasan ghat and finally the long Kasara descent, all slow for a loaded truck. Bhiwandi at the bottom is crowded for most of the day.
Reaching Mumbai: Entry Timing and Last Stretch
The truck reaches the Mumbai region from the north-east, so Thane, Bhiwandi and Kalyan come first, and Navi Mumbai is close by Shil Phata. Andheri, Bandra and South Mumbai are further and depend on Mumbai’s busy-hour truck limits. Buildings with narrow gates need the goods moved to a tempo.
Weather and Busy Weeks on This Road
June to September is the slowest time, with heavy rain and fog on the Kasara ghat, landslips that can close a side, and waterlogging around Thane. December and January fog slows the Kanpur–Jhansi stretch. April to June heat in Bundelkhand and Malwa is severe, so drivers rest at noon.
Need Packers and Movers for Kanpur to Mumbai?
Charges, packing and the companies that run this route are on our Kanpur to Mumbai packers and movers page. Or send one request on ShiftingApp and compare quotes.
Kanpur to Mumbai by Road: Common Questions
Does the Kanpur to Mumbai truck go through Indore?
Usually yes. After Jhansi it follows the old Agra–Mumbai road through Shivpuri, Guna and Dewas to Indore, then down through Dhule and Nashik.
How long does the Kanpur to Mumbai truck take?
About two days for a dedicated truck. Shared trucks take longer, as they often stop at Indore or Nashik to drop other goods.
How many ghats does the Kanpur truck cross before Mumbai?
Three in the second half: the Ganpati ghat near the Narmada, the Bijasan ghat at the Madhya Pradesh–Maharashtra border, and the Kasara ghat into the Mumbai region.
Is Thane quicker than Mumbai city for goods from Kanpur?
Yes. Thane and Bhiwandi are at the foot of the Kasara ghat. Mumbai city and the western suburbs take a few more hours in traffic.
Does the truck from Kanpur to Mumbai need an e-way bill for my household goods?
No. Your own used household goods are on the GST list of goods that do not need an e-way bill. This road crosses 2 state lines (Uttar Pradesh, Madhya Pradesh, Maharashtra), and that does not change the papers. The truck should carry the lorry receipt (LR or bilty) with its number, a signed list of your goods, and its own RC, permit and insurance. Office or business goods are different and may need an e-way bill.