Mumbai to Aurangabad by Road: Truck Route and Transit Time for Household Goods
340 km by road on Samruddhi Mahamarg (Mumbai–Nagpur Expressway), or NH-160 via Nashik. A loaded truck usually takes 5–7 hrs. This page follows the truck: the towns on the way, the slow stretches, how it enters Aurangabad, and the weeks to plan around.
- 340 km by road
- Samruddhi Mahamarg (Mumbai–Nagpur Expressway), or NH-160 via Nashik
- Truck: 5–7 hrs
How long does a truck take from Mumbai to Aurangabad by road?
Mumbai to Chhatrapati Sambhajinagar (Aurangabad) is about 340 km. Most trucks now use the Samruddhi Mahamarg from the Bhiwandi side, which brings the drive down to five to seven hours. Crossing Mumbai and Thane to reach the expressway start takes up much of that time.
The Road from Mumbai to Aurangabad
The truck heads out through Thane towards Bhiwandi and joins the Samruddhi Mahamarg near Amane. The expressway climbs through the Igatpuri tunnels, runs east across Nashik district past Sinnar and the Shirdi interchange, and continues by Vaijapur into Chhatrapati Sambhajinagar. The older road goes up the Kasara ghat on NH-160 to Nashik and then east through Yeola and Vaijapur.
How a Loaded Truck’s Journey Usually Runs
This is a one-day move for most homes. Loading in Mumbai happens in the day, and the truck sets off before the evening rush or after it. On the expressway it reaches the city in the late evening, and unloading is usually done the next morning. A small load can go in a smaller truck that makes the trip in daylight.
Stretches That Slow the Truck
Thane and the Bhiwandi warehouse belt are the slowest part, often longer than the expressway itself. On the Samruddhi Mahamarg, trucks must keep to their lane and speed limit, and fuel and food stops are spaced out. The older road over the Kasara ghat is steep and slow for a loaded truck.
Reaching Aurangabad: Entry Timing and Last Stretch
The expressway reaches the city on its western side, so Waluj, Cidco and the Jalna Road area are reached by short drives. Garkheda and Osmanpura are further in. The old walled city, with its gates and narrow lanes near Gulmandi, does not suit big trucks, and goods need a smaller vehicle there.
Weather and Busy Weeks on This Road
June to September brings heavy rain and fog at the Igatpuri end of both roads, and the Kasara ghat can see landslips. The Marathwada end is drier. Summer from March to May is very hot in Sambhajinagar. Ganeshotsav week makes Mumbai and Thane roads slow at the start.
Need Packers and Movers for Mumbai to Aurangabad?
Charges, packing and the companies that run this route are on our Mumbai to Aurangabad packers and movers page. Or send one request on ShiftingApp and compare quotes.
Mumbai to Aurangabad by Road: Common Questions
Do trucks from Mumbai to Sambhajinagar use the Samruddhi Mahamarg?
Most do now. It starts near Amane on the Bhiwandi side and runs straight to the city, which is faster than the old road over the Kasara ghat and through Nashik.
Is Aurangabad the same as Chhatrapati Sambhajinagar?
Yes, it is the same city under its new official name. Road signs, the expressway interchange and most people now use Sambhajinagar, though the old name is still common in speech.
What is the slowest part of the Mumbai to Sambhajinagar trip?
Getting from your Mumbai home through Thane and Bhiwandi to the expressway start. Once on the Samruddhi Mahamarg, the truck moves quickly.
Does the truck from Mumbai to Aurangabad need an e-way bill for my household goods?
No. Your own used household goods are on the GST list of goods that do not need an e-way bill. This road stays inside Maharashtra. The truck should carry the lorry receipt (LR or bilty) with its number, a signed list of your goods, and its own RC, permit and insurance. Office or business goods are different and may need an e-way bill.